STIGQter STIGQter: STIG Summary:

Network WLAN AP-IG Management Security Technical Implementation Guide

Version: 7

Release: 2 Benchmark Date: 25 Oct 2023

CheckedNameTitle
☐SV-243134r879601_ruleThe password configured on the WLAN access point for key generation and client access must be set to a 15-character or longer complex password as required by USCYBERCOM CTO 07-15 Rev1.
☐SV-243135r879601_ruleThe network device must enforce a minimum 15-character password length.
☐SV-243136r879554_ruleThe network device must not have any default manufacturer passwords when deployed.
☐SV-243137r879547_ruleThe network device must display the Standard Mandatory DoD Notice and Consent Banner before granting access to the device.
☐SV-243138r916342_ruleThe network device must terminate all network connections associated with a device management session at the end of the session, or the session must be terminated after 10 minutes of inactivity except to fulfill documented and validated mission requirements.
☐SV-243139r879594_ruleThe network device must be configured to authenticate each administrator prior to authorizing privileges based on assignment of group or role.
☐SV-243140r879530_ruleThe network device must enforce the assigned privilege level for each administrator and authorizations for access to all commands relative to the privilege level in accordance with applicable policy for the device.
☐SV-243141r879785_ruleThe network device must be configured to implement cryptographic mechanisms using a FIPS 140-2 approved algorithm to protect the confidentiality of remote maintenance sessions.
☐SV-243142r879874_ruleThe network device must generate audit records when successful/unsuccessful logon attempts occur.
☐SV-243143r879887_ruleThe network device must be running an operating system release that is currently supported by the vendor.
☐SV-243144r916111_ruleThe network device must be configured to use an authentication server to authenticate users prior to granting administrative access.
☐SV-243145r928993_ruleThe network device must be configured to authenticate SNMP messages using a FIPS-validated Keyed-Hash Message Authentication Code (HMAC).
☐SV-243146r879589_ruleThe network device must be configured with only one local account to be used as the account of last resort in the event the authentication server is unavailable.
☐SV-243147r879546_ruleThe network device must be configured to enforce the limit of three consecutive invalid logon attempts, after which time it must block any login attempt for 15 minutes.
☐SV-243148r879588_ruleThe network device must be configured to prohibit the use of all unnecessary and/or nonsecure functions, ports, protocols, and/or services.
☐SV-243149r879768_ruleThe network device must authenticate Network Time Protocol (NTP) sources using authentication that is cryptographically based.
☐SV-243150r879597_ruleThe network device must implement replay-resistant authentication mechanisms for network access to privileged accounts.
☐SV-243151r879887_ruleThe network device must be configured with both an ingress and egress ACL.
☐SV-243152r879746_ruleThe network device must be configured to synchronize internal information system clocks using redundant authoritative time sources.