| Checked | Name | Title |
|---|
| ☐ | SV-220623r863275_rule | The Cisco switch must uniquely identify and authenticate all network-connected endpoint devices before establishing any connection. |
| ☐ | SV-220624r1188386_rule | The Cisco switch must authenticate all VLAN Trunk Protocol (VTP) messages with a hash function using the most secured cryptographic algorithm available. |
| ☐ | SV-220625r991847_rule | The Cisco switch must manage excess bandwidth to limit the effects of packet-flooding types of denial-of-service (DoS) attacks. |
| ☐ | SV-220629r856223_rule | The Cisco switch must have Root Guard enabled on all switch ports connecting to access layer switches. |
| ☐ | SV-220630r856224_rule | The Cisco switch must have Bridge Protocol Data Unit (BPDU) Guard enabled on all user-facing or untrusted access switch ports. |
| ☐ | SV-220631r856225_rule | The Cisco switch must have Spanning Tree Protocol (STP) Loop Guard enabled. |
| ☐ | SV-220632r856226_rule | The Cisco switch must have Unknown Unicast Flood Blocking (UUFB) enabled. |
| ☐ | SV-220633r929007_rule | The Cisco switch must have DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources. |
| ☐ | SV-220634r929009_rule | The Cisco switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports. |
| ☐ | SV-220635r929011_rule | The Cisco switch must have Dynamic Address Resolution Protocol (ARP) Inspection (DAI) enabled on all user VLANs. |
| ☐ | SV-220636r1205856_rule | The Cisco switch must have Storm Control configured on all host-facing switchports. |
| ☐ | SV-220637r539671_rule | The Cisco switch must have IGMP or MLD Snooping configured on all VLANs. |
| ☐ | SV-220638r539671_rule | The Cisco switch must implement Rapid Spanning Tree Protocol (STP) where VLANs span multiple switches with redundant links. |
| ☐ | SV-220639r1188389_rule | The Cisco switch must enable Unidirectional Link Detection (UDLD) to protect against one-way connections. |
| ☐ | SV-220640r1188390_rule | The Cisco switch must have all trunk links enabled statically. |
| ☐ | SV-220641r991848_rule | The Cisco switch must have all disabled switch ports assigned to an unused VLAN. |
| ☐ | SV-220642r991849_rule | The Cisco switch must not have the default VLAN assigned to any host-facing switch ports. |
| ☐ | SV-220643r991850_rule | The Cisco switch must have the default VLAN pruned from all trunk ports that do not require it. |
| ☐ | SV-220644r991852_rule | The Cisco switch must not use the default VLAN for management traffic. |
| ☐ | SV-220645r991853_rule | The Cisco switch must have all user-facing or untrusted ports configured as access switch ports. |
| ☐ | SV-220646r991854_rule | The Cisco switch must have the native VLAN assigned to an ID other than the default VLAN for all 802.1q trunk links. |
| ☐ | SV-220647r991855_rule | The Cisco switch must not have any switchports assigned to the native VLAN. |
STIGQter: STIG Summary: