| Checked | Name | Title |
|---|
| ☐ | SV-220649r863283_rule | The Cisco switch must uniquely identify and authenticate all network-connected endpoint devices before establishing any connection. |
| ☐ | SV-220650r539671_rule | The Cisco switch must authenticate all VLAN Trunk Protocol (VTP) messages with a hash function using the most secured cryptographic algorithm available. |
| ☐ | SV-220651r1107171_rule | The Cisco switch must manage excess bandwidth to limit the effects of packet flooding types of denial-of-service (DoS) attacks. |
| ☐ | SV-220655r917683_rule | The Cisco switch must have Root Guard enabled on all switch ports connecting to access layer switches. |
| ☐ | SV-220656r856278_rule | The Cisco switch must have BPDU Guard enabled on all user-facing or untrusted access switch ports. |
| ☐ | SV-220657r856279_rule | The Cisco switch must have STP Loop Guard enabled. |
| ☐ | SV-220658r856280_rule | The Cisco switch must have Unknown Unicast Flood Blocking (UUFB) enabled. |
| ☐ | SV-220659r928999_rule | The Cisco switch must have DHCP snooping for all user VLANs to validate DHCP messages from untrusted sources. |
| ☐ | SV-220660r929001_rule | The Cisco switch must have IP Source Guard enabled on all user-facing or untrusted access switch ports. |
| ☐ | SV-220661r929003_rule | The Cisco switch must have Dynamic Address Resolution Protocol (ARP) Inspection (DAI) enabled on all user VLANs. |
| ☐ | SV-220662r648766_rule | The Cisco switch must have Storm Control configured on all host-facing switchports. |
| ☐ | SV-220663r929005_rule | The Cisco switch must have IGMP or MLD Snooping configured on all VLANs. |
| ☐ | SV-220664r539671_rule | The Cisco switch must implement Rapid STP where VLANs span multiple switches with redundant links. |
| ☐ | SV-220665r539671_rule | The Cisco switch must enable Unidirectional Link Detection (UDLD) to protect against one-way connections. |
| ☐ | SV-220666r539671_rule | The Cisco switch must have all trunk links enabled statically. |
| ☐ | SV-220667r991904_rule | The Cisco switch must have all disabled switch ports assigned to an unused VLAN. |
| ☐ | SV-220668r991905_rule | The Cisco switch must not have the default VLAN assigned to any host-facing switch ports. |
| ☐ | SV-220669r991906_rule | The Cisco switch must have the default VLAN pruned from all trunk ports that do not require it. |
| ☐ | SV-220670r991907_rule | The Cisco switch must not use the default VLAN for management traffic. |
| ☐ | SV-220671r991908_rule | The Cisco switch must have all user-facing or untrusted ports configured as access switch ports. |
| ☐ | SV-220672r991909_rule | The Cisco switch must have the native VLAN assigned to an ID other than the default VLAN for all 802.1q trunk links. |
| ☐ | SV-220673r991910_rule | The Cisco switch must not have any switchports assigned to the native VLAN. |
STIGQter: STIG Summary: