STIGQter: STIG Summary: A10 Networks ADC NDM Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 15 Apr 2016:

The A10 Networks ADC must off-load audit records onto a different system or media than the system being audited.

DISA Rule

SV-82581r1_rule

Vulnerability Number

V-68091

Group Title

SRG-APP-000515-NDM-000325

Rule Version

AADC-NM-000130

Severity

CAT II

CCI(s)

• CCI-001851 - The information system off-loads audit records per organization-defined frequency onto a different system or media than the system being audited.

Weight

10

Fix Recommendation

The following command specifies the severity levels of event messages to send to a Syslog server:
logging syslog [severity-level]

The following command specifies a Syslog server to which to send event messages:
logging host ipaddr [ipaddr...][port protocol-port]
"ipaddr" is the IP address of the Syslog server. IP addresses can be entered for up to 10 remote logging Syslog servers.
"protocolport" is the port number to which to send messages. Only one protocol port can be specified with the command. All servers must use the same port to listen for syslog messages.

Since the Audit log is separate from the Event log, it must have its own target to write messages to:
logging auditlog host [ipaddr | hostname][facility facility-name]
"ipaddr | hostname" is the IP address or hostname of the server.
"facility-name" is the name of a log facility.

Check Contents

Review the device configuration.

The following command shows the portion of the device configuration that includes the word "host":
show run | inc host

If the output does not display the "logging host" and "logging auditlog host" commands, this is a finding.

The following command shows the logging policy:
show log policy

If Syslog logging is disabled, this is a finding.

Vulnerability Number

V-68091

Documentable

False

Rule Version

AADC-NM-000130

Severity Override Guidance

Review the device configuration.

The following command shows the portion of the device configuration that includes the word "host":
show run | inc host

If the output does not display the "logging host" and "logging auditlog host" commands, this is a finding.

The following command shows the logging policy:
show log policy

If Syslog logging is disabled, this is a finding.

Check Content Reference

M

Target Key

2915

Comments