STIGQter: STIG Summary: A10 Networks ADC NDM Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 15 Apr 2016:

The A10 Networks ADC must compare internal information system clocks at least every 24 hours with an authoritative time server.

DISA Rule

SV-82567r1_rule

Vulnerability Number

V-68077

Group Title

SRG-APP-000371-NDM-000296

Rule Version

AADC-NM-000099

Severity

CAT III

CCI(s)

• CCI-001891 - The information system compares internal information system clocks on an organization-defined frequency with an organization-defined authoritative time source.

Weight

10

Fix Recommendation

Up to four NTP servers can be configured. The following commands set the NTP server and enable the Network Time Protocol:
ntp server [hostname | ipaddr]
ntp enable

Check Contents

Review the device configuration.

The following command shows clock information:
show clock detail

If the output does not show NTP as the time source, this is a finding.

If a dot appears in front of the time, the device has been configured to use NTP, but NTP is not synchronized. This is also a finding.

Vulnerability Number

V-68077

Documentable

False

Rule Version

AADC-NM-000099

Severity Override Guidance

Review the device configuration.

The following command shows clock information:
show clock detail

If the output does not show NTP as the time source, this is a finding.

If a dot appears in front of the time, the device has been configured to use NTP, but NTP is not synchronized. This is also a finding.

Check Content Reference

M

Target Key

2915

Comments