STIGQter: STIG Summary: HP FlexFabric Switch L2S Security Technical Implementation Guide Version: 1 Release: 3 Benchmark Date: 24 Jul 2020:

The HP FlexFabric Switch must not have the default VLAN assigned to any host-facing switch ports.

DISA Rule

SV-80577r1_rule

Vulnerability Number

V-66087

Group Title

SRG-NET-000512-L2S-000008

Rule Version

HFFS-L2-000025

Severity

CAT II

CCI(s)

CCI-000366 - The organization implements the security configuration settings.

Weight

Fix Recommendation

Remove the assignment of the default VLAN from all access switch ports.

<HP>display vlan 1

[HP-vlan2]port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/48

[HP-GigabitEthernet1/0/1]shutdown

Check Contents

Review the HP FlexFabric Switch configurations and verify that no access switch ports have been assigned membership to the default VLAN (i.e., VLAN 1). A good method of ensuring there is not membership to the default VLAN is to have it disabled (i.e., shutdown) on the switch.

If there are access switch ports assigned to the default VLAN, this is a finding.

<HP>display vlan 1
VLAN ID: 1
VLAN type: Static
Route interface: Configured:
Description: VLAN 0001
Name: VLAN 0001
Tagged ports: None
Untagged ports:
GigabitEthernet1/0/1 GigabitEthernet1/0/2
GigabitEthernet1/0/3 GigabitEthernet1/0/4

[HP-GigabitEthernet1/0/12]shutdown

The HP FlexFabric Switch must not have the default VLAN assigned to any host-facing switch ports.

DISA Rule

Vulnerability Number

Group Title

Rule Version

Severity

CCI(s)

Weight

Fix Recommendation

Check Contents

Vulnerability Number

Documentable

Rule Version

Severity Override Guidance

Check Content Reference

Target Key

Comments