STIGQter STIGQter: STIG Summary: Nokia Service Router OS 25.x Router Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 28 Apr 2026:

The Nokia router must employ organization-defined controls by type of denial of service (DoS) to achieve the DoS objective.

DISA Rule

SV-283895r1203934_rule

Vulnerability Number

V-283895

Group Title

SRG-NET-000705-RTR-000110

Rule Version

NOKI-RT-000810

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure the router to employ organization-defined controls by type of DoS to achieve the DoS objective using the example below:

Create a CPM-Filter:

- configure system security cpm-filter
- config>sys>security>cpm-filter# default-action drop
- config>sys>security>cpm-filter# ip-filter
- config>sys>sec>cpm>ip-filter#
- config>sys>sec>cpm>ip-filter# entry 10 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "ospf-igp"
- cfg>sys>sec>cpm>ip-filter>entry>match# src-ip 192.168.1.1/32
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 20 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "pim"
- cfg>sys>sec>cpm>ip-filter>entry>match# src-ip 192.168.1.2/32
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 30 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "igmp"
- cfg>sys>sec>cpm>ip-filter>entry>match# src-ip 224.0.0.0/4
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 40 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "tcp"
- cfg>sys>sec>cpm>ip-filter>entry>match# src-ip 192.168.100.1/32
- cfg>sys>sec>cpm>ip-filter>entry>match# dst-ip 192.168.100.2/32
- cfg>sys>sec>cpm>ip-filter>entry>match# src-port 179
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 50 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "icmp"
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 60 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "udp"
- cfg>sys>sec>cpm>ip-filter>entry>match# dst-port 161
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 70 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "udp"
- cfg>sys>sec>cpm>ip-filter>entry>match# dst-port 162
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 80 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "tcp"
- cfg>sys>sec>cpm>ip-filter>entry>match# dst-port 22
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# entry 90 create
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "tcp"
- cfg>sys>sec>cpm>ip-filter>entry>match# dst-port 23
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action accept
- cfg>sys>sec>cpm>ip-filter>entry# exit all

Create Distributed CPU Protection:

- configure system security dist-cpu-protection policy "rate-limit" create
- config>sys>security>dist-cpu-protection>policy# static-policer "PIM-RATE" create
- config>sys>security>dist-cpu-protection>policy>static# rate kbps 2000 mbs 200
- config>sys>security>dist-cpu-p" create >policy# static-policer "ICMP-RATE
- config>sys>security>dist-cpu-protection>policy>static# exit
- config>sys>security>dist-cpu-protection>policy# static-policer "ICMP-RATE" create
- config>sys>security>dist-cpu-protection>policy>static# rate kbps 2000 mbs 200
- config>sys>security>dist-cpu-protection>policy>static# exit
- config>sys>security>dist-cpu-protection>policy# static-policer "ALL-Other-Rate"
- config>sys>security>dist-cpu-protection>policy>static# rate kbps 2000 mbs 200
- config>sys>security>dist-cpu-protection>policy>static# exit
- config>sys>security>dist-cpu-protection>policy# protocol icmp create
- config>sys>security>dist-cpu-protection>policy>protocol# enforcement static "ICMP-RATE"
- config>sys>security>dist-cpu-protection>policy>protocol# exit
- config>sys>security>dist-cpu-protection>policy# protocol pim create
- config>sys>security>dist-cpu-protection>policy>protocol# enforcement static "PIM-RATE"
- config>sys>security>dist-cpu-protection>policy>protocol# exit
- config>sys>security>dist-cpu-protection>policy# protocol all-unspecified create
- config>sys>security>dist-cpu-protection>policy>protocol# enforcement static "ALL-Other-Rate"
- config>sys>security>dist-cpu-protection>policy>protocol# exit all

Apply Distributed CPU Protection to the interface:

- configure router interface "TEST" dist-cpu-protection "rate-limit"

Check Contents

Verify the router is configured to employ organization-defined controls by type of DoS to achieve the DoS objective.

Verify CPM IP-Filter using the example below:

- show system security cpm-filter ip-filter entry 10

CPM IP Filter Entry

Entry Id : 10
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Entry Match Criteria :
-------------------------------------------------------------------------------
Log Id : n/a
Src. IP : 192.168.1.1/32
Src. Port : n/a
Dst. IP : n/a
Dest. Port : n/a
Protocol : ospf-igp Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
IP-Option : n/a Multiple Option : Off
TCP-syn : Off TCP-ack : Off
Action : Forward
Match Router ID : n/a
Dropped pkts : 0 Forwarded pkts : 0

Verify Distributed CPU Protection using the example below:

- show system security dist-cpu-protection policy "rate-limit" detail

Distributed CPU Protection Policy

Policy Name : rate-limit
Description : (Not Specified)
Policy Type : access-network

-------------------------------------------------------------------------------
Static Policer
-------------------------------------------------------------------------------
Static Policer : PIM-RATE
Description : (Not Specified)
Kbps : 2000 kbps MBS : 200 KB
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Static Policer : ICMP-RATE
Description : (Not Specified)
Kbps : 2000 kbps MBS : 200 KB
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Static Policer : ALL-Other-Rate
Description : (Not Specified)
Kbps : 2000 kbps MBS : 200 KB
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Local Monitoring Policer
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Protocol (Dynamic Policer)
-------------------------------------------------------------------------------
Protocol : icmp
Enforcement Type : static Enforcement Plcr: ICMP-RATE

Dynamic Policer Parameters
--------------------------
Packets : max Within : 1 seconds
Initial Delay : none
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Protocol : all-unspecified
Enforcement Type : static Enforcement Plcr: ALL-Other-Rate

Dynamic Policer Parameters
--------------------------
Packets : max Within : 1 seconds
Initial Delay : none
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Protocol : pim
Enforcement Type : static Enforcement Plcr: PIM-RATE

Dynamic Policer Parameters
--------------------------
Packets : max Within : 1 seconds
Initial Delay : none
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable
-------------------------------------------------------------------------------

If the router is not configured to employ organization-defined controls by type of DoS to achieve the DoS objective, this is a finding.

Vulnerability Number

V-283895

Documentable

False

Rule Version

NOKI-RT-000810

Severity Override Guidance

Verify the router is configured to employ organization-defined controls by type of DoS to achieve the DoS objective.

Verify CPM IP-Filter using the example below:

- show system security cpm-filter ip-filter entry 10

CPM IP Filter Entry

Entry Id : 10
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Entry Match Criteria :
-------------------------------------------------------------------------------
Log Id : n/a
Src. IP : 192.168.1.1/32
Src. Port : n/a
Dst. IP : n/a
Dest. Port : n/a
Protocol : ospf-igp Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
Fragment : Off Option-present : Off
IP-Option : n/a Multiple Option : Off
TCP-syn : Off TCP-ack : Off
Action : Forward
Match Router ID : n/a
Dropped pkts : 0 Forwarded pkts : 0

Verify Distributed CPU Protection using the example below:

- show system security dist-cpu-protection policy "rate-limit" detail

Distributed CPU Protection Policy

Policy Name : rate-limit
Description : (Not Specified)
Policy Type : access-network

-------------------------------------------------------------------------------
Static Policer
-------------------------------------------------------------------------------
Static Policer : PIM-RATE
Description : (Not Specified)
Kbps : 2000 kbps MBS : 200 KB
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Static Policer : ICMP-RATE
Description : (Not Specified)
Kbps : 2000 kbps MBS : 200 KB
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Static Policer : ALL-Other-Rate
Description : (Not Specified)
Kbps : 2000 kbps MBS : 200 KB
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Local Monitoring Policer
-------------------------------------------------------------------------------
No Matching Entries
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
Protocol (Dynamic Policer)
-------------------------------------------------------------------------------
Protocol : icmp
Enforcement Type : static Enforcement Plcr: ICMP-RATE

Dynamic Policer Parameters
--------------------------
Packets : max Within : 1 seconds
Initial Delay : none
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Protocol : all-unspecified
Enforcement Type : static Enforcement Plcr: ALL-Other-Rate

Dynamic Policer Parameters
--------------------------
Packets : max Within : 1 seconds
Initial Delay : none
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable

-------------------------------------------------------------------------------
Protocol : pim
Enforcement Type : static Enforcement Plcr: PIM-RATE

Dynamic Policer Parameters
--------------------------
Packets : max Within : 1 seconds
Initial Delay : none
Detection Time : 30 seconds
Exceed-Action : None Hold-Down Time : none
Log Events : enable
-------------------------------------------------------------------------------

If the router is not configured to employ organization-defined controls by type of DoS to achieve the DoS objective, this is a finding.

Check Content Reference

M

Target Key

5746