SV-283884r1203901_rule
V-283884
SRG-NET-000230-RTR-000002
NOKI-RT-000670
CAT II
10
Configure all eBGP routers with unique keys for each eBGP neighbor that it peers with, as shown in the example below:
Configure a key chain:
- configure system security keychain "test" tcp-option-number send tcp-ao
- configure system security keychain "test" tcp-option-number receive tcp-ao
- configure system security keychain "test" direction bi entry 1 key 12345678901 algorithm aes-128-cmac-96 begin-time 2025/12/28 UTC 00:00:00
- configure system security keychain "test" direction bi entry 2 key 12345678901 algorithm aes-128-cmac-96 begin-time 2026/06/28 UTC 00:00:00
Apply the key chain to the BGP neighbor:
- configure router bgp group "eBGP" auth-keychain "test"
Interview the information system security manager (ISSM) and router administrator to determine if unique keys are being used.
Verify the key-chain is enabled for the BGP protocol using the command below:
- show system security keychain "test" detail
Key chain:test
Description : (Not Specified)
TCP-Option number send : tcp-ao Admin state : Up
TCP-Option number receive : tcp-ao Oper state : Up
Used by : BGP
Expired : No
Key entries for key chain: test
Id : 1 Direction : send-receive
Algorithm : aes-128-cmac-96 Option : none
Admin State : Up RX Valid : Yes
TX Active : Yes Tolerance : 300
Begin Time : 2025/12/28 00:00:00 Begin Time (UTC) : 2025/12/28 00:00:00
End Time : 2026/06/28 00:00:00 End Time (UTC) : 2026/06/28 00:00:00
NOTE: Nokia router is limited to MD5, HMAC-sha-1-96, and AES-128-CMAC-96 for BGP authentication. Configure the router with AES-128-CMAC-96, which will be FIPS compliant once SP 800-224 is finalized. Until then, this is a finding because it is not FIPS compliant but may be downgraded to a CAT III.
If the key-chain is not enabled for the BGP protocol, this is a finding.
V-283884
False
NOKI-RT-000670
Interview the information system security manager (ISSM) and router administrator to determine if unique keys are being used.
Verify the key-chain is enabled for the BGP protocol using the command below:
- show system security keychain "test" detail
Key chain:test
Description : (Not Specified)
TCP-Option number send : tcp-ao Admin state : Up
TCP-Option number receive : tcp-ao Oper state : Up
Used by : BGP
Expired : No
Key entries for key chain: test
Id : 1 Direction : send-receive
Algorithm : aes-128-cmac-96 Option : none
Admin State : Up RX Valid : Yes
TX Active : Yes Tolerance : 300
Begin Time : 2025/12/28 00:00:00 Begin Time (UTC) : 2025/12/28 00:00:00
End Time : 2026/06/28 00:00:00 End Time (UTC) : 2026/06/28 00:00:00
NOTE: Nokia router is limited to MD5, HMAC-sha-1-96, and AES-128-CMAC-96 for BGP authentication. Configure the router with AES-128-CMAC-96, which will be FIPS compliant once SP 800-224 is finalized. Until then, this is a finding because it is not FIPS compliant but may be downgraded to a CAT III.
If the key-chain is not enabled for the BGP protocol, this is a finding.
M
5746