STIGQter: STIG Summary: Nokia Service Router OS 25.x Router Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 28 Apr 2026:

The Nokia perimeter router must be configured to drop IPv6 packets containing the network service access point (NSAP) address option within the Destination Option header.

DISA Rule

SV-283847r1203790_rule

Vulnerability Number

V-283847

Group Title

SRG-NET-000364-RTR-000205

Rule Version

NOKI-RT-000290

Severity

CAT II

CCI(s)

• CCI-002403 - Only allow incoming communications from organization-defined authorized sources routed to organization-defined authorized destinations.

Weight

10

Fix Recommendation

Configure the router to drop IPv6 packets containing a Destination Option header with the option type value of 0xC3 (NSAP address).

Configure an IPv6 filter:

- config>filter# ipv6-filter 40 create
- config>filter>ipv6-filter# entry 10 create
- config>filter>ipv6-filter>entry# match next-header 60
- config>filter>ipv6-filter>entry>match# back
- config>filter>ipv6-filter>entry# action drop
- config>filter>ipv6-filter>entry# exit all

Apply the IPv6 filter to the interface:

- configure router interface "TO-PE2" ingress filter ipv6 40

Check Contents

This requirement is not applicable for the DODIN Backbone.

Review the router configuration and determine if filters are bound to the applicable interfaces to drop IPv6 packets containing a Destination Option header with option type value of 0xC3 (NSAP address).

Verify the IPv6 filter has the Next Header value set to "60", as shown in the example below:

- show filter ipv6 40

Entry : 10
Description : (Not Specified)
Log Id : n/a
Src. IP : ::/0
Src. Port : n/a
Dest. IP : ::/0
Dest. Port : n/a
Next Header : 60

Verify an "Ing IPv6 Flt" has been applied to the interface, as shown in the example below:

- show router interface "TO-PE2" detail | match "Ingr IPv6 Flt"
Egr IPv6 Flt : none Ingr IPv6 Flt : 40

If the router is not configured to drop IPv6 packets containing the NSAP address option within the Destination Option header, this is a finding.

Vulnerability Number

V-283847

Documentable

False

Rule Version

NOKI-RT-000290

Severity Override Guidance

This requirement is not applicable for the DODIN Backbone.

Review the router configuration and determine if filters are bound to the applicable interfaces to drop IPv6 packets containing a Destination Option header with option type value of 0xC3 (NSAP address).

Verify the IPv6 filter has the Next Header value set to "60", as shown in the example below:

- show filter ipv6 40

Entry : 10
Description : (Not Specified)
Log Id : n/a
Src. IP : ::/0
Src. Port : n/a
Dest. IP : ::/0
Dest. Port : n/a
Next Header : 60

Verify an "Ing IPv6 Flt" has been applied to the interface, as shown in the example below:

- show router interface "TO-PE2" detail | match "Ingr IPv6 Flt"
Egr IPv6 Flt : none Ingr IPv6 Flt : 40

If the router is not configured to drop IPv6 packets containing the NSAP address option within the Destination Option header, this is a finding.

Check Content Reference

M

Target Key

5746