STIGQter STIGQter: STIG Summary: Nokia Service Router OS 25.x Router Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 28 Apr 2026:

The Nokia router must be configured to protect against or limit the effects of denial-of-service (DoS) attacks by employing control plane protection.

DISA Rule

SV-283842r1203775_rule

Vulnerability Number

V-283842

Group Title

SRG-NET-000362-RTR-000110

Rule Version

NOKI-RT-000240

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Implement control plane protection by classifying traffic types based on importance and configure filters to restrict and rate limit the traffic directed to and processed by the RP according to each class.

Create a CPM filter to drop the traffic to protect the control plane, as shown in the commands below:

- configure system security cpm-filter
- config>sys>security>cpm-filter# ip-filter
- config>sys>sec>cpm>ip-filter# entry 10 create
- cfg>sys>sec>cpm>ip-filter>entry# match src-ip 100.100.100.x/32
- cfg>sys>sec>cpm>ip-filter>entry# match protocol "icmp"
- cfg>sys>sec>cpm>ip-filter>entry>match# exit
- cfg>sys>sec>cpm>ip-filter>entry# action drop
- cfg>sys>sec>cpm>ip-filter>entry# exit
- config>sys>sec>cpm>ip-filter# no shutdown
- config>sys>sec>cpm>ip-filter# exit all

Create a dist-cpu-protection policy to rate-limit traffic before it reaches the CPM, as shown in the commands below:

- configure system security dist-cpu-protection
- config>sys>security>dist-cpu-protection# policy "protect-cpm" create
- config>sys>security>dist-cpu-protection>policy# static-policer Rate-Limit-ICMP-Traffic create
- config>sys>security>dist-cpu-protection>policy>static$ rate packets 1 within 1
- config>sys>security>dist-cpu-protection>policy>static$ exceed-action discard
- config>sys>security>dist-cpu-protection>policy>static$ exit
- config>sys>security>dist-cpu-protection>policy# protocol icmp create
- config>sys>security>dist-cpu-protection>policy>protocol$ enforcement static "Rate-Limit-ICMP-Traffic"
-config>sys>security>dist-cpu-protection>policy>protocol$ exit all

Apply a Distributed CPU Protection Policy on the interface:

- configure router interface "TO-PE2" dist-cpu-protection "protect-cpm"

Check Contents

Determine whether control plane protection has been implemented on the device by verifying that traffic types have been classified based on importance levels and a policy has been configured to filter and rate limit the traffic according to each class, as shown below:

- show router interface "TO-PE2" dist-cpu-protection detail

Interface "TO-PE2" (Router: Base)

Distributed CPU Protection Policy : protect-cpm

-------------------------------------------------------------------------------
Statistics/Policer-State Information
-------------------------------------------------------------------------------
Static Policer
-------------------------------------------------------------------------------
Policer-Name : Rate-Limit-ICMP-Traffic
Card/FP : 1/1 Policer-State : Conform
Protocols Mapped : icmp
Exceed-Count : 0
Total Exceed-Count : 0 Exceed-State-Count : 0
Detec. Time Remain : 0 seconds Hold-Down Remain. : none
Operational (adapted) Rate Parameters:
Oper. Packets : 1 ppi Oper. Within : 1 seconds
Oper. Initial Delay: none
Oper. Depth : 0 packets

If the router does not have control plane protection implemented, this is a finding.

Vulnerability Number

V-283842

Documentable

False

Rule Version

NOKI-RT-000240

Severity Override Guidance

Determine whether control plane protection has been implemented on the device by verifying that traffic types have been classified based on importance levels and a policy has been configured to filter and rate limit the traffic according to each class, as shown below:

- show router interface "TO-PE2" dist-cpu-protection detail

Interface "TO-PE2" (Router: Base)

Distributed CPU Protection Policy : protect-cpm

-------------------------------------------------------------------------------
Statistics/Policer-State Information
-------------------------------------------------------------------------------
Static Policer
-------------------------------------------------------------------------------
Policer-Name : Rate-Limit-ICMP-Traffic
Card/FP : 1/1 Policer-State : Conform
Protocols Mapped : icmp
Exceed-Count : 0
Total Exceed-Count : 0 Exceed-State-Count : 0
Detec. Time Remain : 0 seconds Hold-Down Remain. : none
Operational (adapted) Rate Parameters:
Oper. Packets : 1 ppi Oper. Within : 1 seconds
Oper. Initial Delay: none
Oper. Depth : 0 packets

If the router does not have control plane protection implemented, this is a finding.

Check Content Reference

M

Target Key

5746