STIGQter STIGQter: STIG Summary: Nokia Service Router OS 25.x Router Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 28 Apr 2026:

The Nokia Multicast Source Discovery Protocol (MSDP) router must be configured to use its loopback address as the source address when originating MSDP traffic.

DISA Rule

SV-283831r1203742_rule

Vulnerability Number

V-283831

Group Title

SRG-NET-000512-RTR-000011

Rule Version

NOKI-RT-000130

Severity

CAT III

CCI(s)

Weight

10

Fix Recommendation

Ensure the router's loopback address is used as the source address when originating traffic.

Configure the local address for the MSDP, as shown in the example below:

- configure router msdp local-address 3.3.3.3

Check Contents

Review the router configuration to verify a loopback address has been configured.

Verify a loopback interface is used as the source address for all MSDP packets generated by the router.

Verify "Local Address" is defined using the example below:

- show router msdp status | match "Local Address"
Local Address : 3.3.3.3

If the router does not use its loopback address as the source address when originating MSDP traffic, this is a finding.

Vulnerability Number

V-283831

Documentable

False

Rule Version

NOKI-RT-000130

Severity Override Guidance

Review the router configuration to verify a loopback address has been configured.

Verify a loopback interface is used as the source address for all MSDP packets generated by the router.

Verify "Local Address" is defined using the example below:

- show router msdp status | match "Local Address"
Local Address : 3.3.3.3

If the router does not use its loopback address as the source address when originating MSDP traffic, this is a finding.

Check Content Reference

M

Target Key

5746