STIGQter STIGQter: STIG Summary: Nokia Service Router OS 25.x Layer 2 Switch Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 28 Apr 2026:

The Nokia layer 2 switch must provide source Internet Protocol (IP) address filtering on untrusted layer 2 interfaces.

DISA Rule

SV-283684r1204128_rule

Vulnerability Number

V-283684

Group Title

SRG-NET-000362-L2S-000026

Rule Version

NOKI-L2-000120

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure the Nokia router VPLS service to enable DHCP snooping at all points where DHCP messages requiring snooping enter the VPLS service:

- configure service vpls <service id> sap <sap id> dhcp snoop

Populate the DHCP lease state information extracted from snooped DHCP ACK messages. If the optional number "lease state table entries allowed" is omitted, only a single entry is allowed. Once the maximum number of entries has been reached, subsequent lease state entries are not allowed, and DHCP ACK messages are discarded.

- configure service vpls <service id> sap <sap id> dhcp lease-populate <number of DHCP leases allowed>

Enable anti-spoof filtering for untrusted VPLS service access points. Anti-spoof type can be ip, ip-mac, or mac.

When type "ip" is used, only the source IP address is used in its lookup. The "ip-mac" type uses both the IP address and source MAC address in its lookup, while the "mac" type uses only the source MAC address in its lookup.

If an entry does not match the ingress packet, the packet is silently discarded while incrementing the SAP discard counter.

- configure service vpls <service id> sap <sap id> anti-spoof <anti-spoof type>

Check Contents

Review the router virtual private local area network service (VPLS) configuration and verify an equivalent command for the Dynamic Address Resolution Protocol Inspection feature is enabled on all user virtual local area networks (VLANs).

Verify both "DHCP snooping" and "lease populate" options under DHCP result for each service access point (SAP) configured within a VPLS service:

- show service id 10 sap 1/1/c3/10 detail | match "Anti Spoofing"
Anti Spoofing : Ip-Mac Dynamic Hosts : Enabled

Using the same command, verify "Anti Spoofing" is enabled with type IP-MAC.

If this is not enabled on all user VLANs, this is a finding.

Vulnerability Number

V-283684

Documentable

False

Rule Version

NOKI-L2-000120

Severity Override Guidance

Review the router virtual private local area network service (VPLS) configuration and verify an equivalent command for the Dynamic Address Resolution Protocol Inspection feature is enabled on all user virtual local area networks (VLANs).

Verify both "DHCP snooping" and "lease populate" options under DHCP result for each service access point (SAP) configured within a VPLS service:

- show service id 10 sap 1/1/c3/10 detail | match "Anti Spoofing"
Anti Spoofing : Ip-Mac Dynamic Hosts : Enabled

Using the same command, verify "Anti Spoofing" is enabled with type IP-MAC.

If this is not enabled on all user VLANs, this is a finding.

Check Content Reference

M

Target Key

5743