STIGQter: STIG Summary: Honeywell Android 13 COPE Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 22 Apr 2025:

Honeywell Android 13 must be configured to not allow backup of [all applications, configuration data] to remote systems.

DISA Rule

SV-274401r1100773_rule

Vulnerability Number

V-274401

Group Title

PP-MDF-333250

Rule Version

HONW-13-008600

Severity

CAT II

CCI(s)

• CCI-001090 - Prevent unauthorized and unintended information transfer via shared system resources.

Weight

10

Fix Recommendation

Configure the Honeywell Android 13 device to disable backup to remote systems (including commercial clouds).

On the EMM console:

COBO and COPE:

1. Open "Device owner management".
2. Toggle "Enable backup service" to "OFF".

Note: Because personal accounts cannot be added to the work profile (HONW-13-009800), this control only impacts personal profile accounts. The site can allow backup based on local policy.

Check Contents

Review managed Honeywell Android 13 device configuration settings to determine if the capability to back up to a remote system has been disabled.

Note: Because personal accounts cannot be added to the work profile (HONW-13-009800), this control only impacts personal profile accounts. The site can allow backup based on local policy.

This validation procedure is performed on both the EMM Administration Console and the managed Honeywell Android 13 device.

On the EMM console:

COBO and COPE:

1. Open "Device owner management".
2. Verify that "Enable backup service" is toggled to "OFF".

On the managed Honeywell Android 13 device:

COBO:

1. Go to Settings >> System >> System >> Backup.
2. Verify that Backup settings is "Not available".

COPE:

1. Go to Settings >> System >> System >> Backup.
2. Select "Work".
3. Verify that Backup settings is "Not available".

If the EMM console device policy is not set to disable the capability to back up to a remote system, or on the managed Honeywell Android 13 device, the device policy is not set to disable the capability to back up to a remote system, this is a finding.

Vulnerability Number

V-274401

Documentable

False

Rule Version

HONW-13-008600

Severity Override Guidance

Review managed Honeywell Android 13 device configuration settings to determine if the capability to back up to a remote system has been disabled.

Note: Because personal accounts cannot be added to the work profile (HONW-13-009800), this control only impacts personal profile accounts. The site can allow backup based on local policy.

This validation procedure is performed on both the EMM Administration Console and the managed Honeywell Android 13 device.

On the EMM console:

COBO and COPE:

1. Open "Device owner management".
2. Verify that "Enable backup service" is toggled to "OFF".

On the managed Honeywell Android 13 device:

COBO:

1. Go to Settings >> System >> System >> Backup.
2. Verify that Backup settings is "Not available".

COPE:

1. Go to Settings >> System >> System >> Backup.
2. Select "Work".
3. Verify that Backup settings is "Not available".

If the EMM console device policy is not set to disable the capability to back up to a remote system, or on the managed Honeywell Android 13 device, the device policy is not set to disable the capability to back up to a remote system, this is a finding.

Check Content Reference

M

Target Key

5702