STIGQter: STIG Summary: HPE Aruba Networking AOS VPN Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 22 Oct 2024:

AOS, when used as a VPN Gateway, must authenticate all network-connected endpoint devices before establishing a connection.

DISA Rule

SV-266988r1040893_rule

Vulnerability Number

V-266988

Group Title

SRG-NET-000343-VPN-001370

Rule Version

ARBA-VN-001370

Severity

CAT II

CCI(s)

• CCI-001958 - Authenticate organization-defined devices and/or types of devices before establishing a local, remote, and/or network connection.

Weight

10

Fix Recommendation

Configure AOS using the web interface:

1. Navigate to Configuration >> Services >> VPN and expand "Site-to-Site".
2. Select the configured site-to-site VPN IPsec maps. Select the applicable Server certificate. Select the applicable trusted DOD root CA under "CA certificate:".
3. Click Submit >> Pending Changes >> Deploy Changes.
4. Navigate to Configuration >> Access Points >> Remote APs tab.
5. Select the check box next to the AP Name in the Remote AP table and click "Provision".
6. In the "General" tab, select "Certificate" from the "Authentication method:" drop-down list.
7. Click "Submit" to apply the configuration and reboot the AP as a certificate Remote AP.
8. Click Pending Changes >> Deploy Changes.

Check Contents

Verify the AOS configuration with the following command:

1. Site-to-site VPN:
Using the CLI:
show crypto isakmp sa

If the IPsec security association is not operating with certificates ("-c"), this is a finding.

2. Hardware client VPN:
Using the web GUI, navigate to Configuration >> Access Points >> Remote APs. Review each provisioned RAP and verify that each AP has "c" in the FLAGS column.

If certificate authentication is not configured for each RAP, this is a finding.

Vulnerability Number

V-266988

Documentable

False

Rule Version

ARBA-VN-001370

Severity Override Guidance

Verify the AOS configuration with the following command:

1. Site-to-site VPN:
Using the CLI:
show crypto isakmp sa

If the IPsec security association is not operating with certificates ("-c"), this is a finding.

2. Hardware client VPN:
Using the web GUI, navigate to Configuration >> Access Points >> Remote APs. Review each provisioned RAP and verify that each AP has "c" in the FLAGS column.

If certificate authentication is not configured for each RAP, this is a finding.

Check Content Reference

M

Target Key

5645