SV-266156r1024848_rule
V-266156
SRG-NET-000362-ALG-000112
F5BI-AP-300059
CAT II
10
From the BIG-IP GUI:
1. Security.
2. DoS Protection.
3. Device Protection.
4. Expand each of the applicable families (Network, DNS, SIP) one at a time depending on the traffic being handled by the BIG-IP and do the following for each:
a. Check the box at the top of the list of signatures to select all.
b. Set "Set State" to "Mitigate".
5. Click "Commit Changes to System".
Note: Sites must operationally test or initially use learning mode prior to turning on all of the options in all families to prevent operational impacts, particularly in implementations with large traffic volumes.
If the BIG-IP appliance does not perform content filtering as part of the traffic management functions, this is not applicable.
From the BIG-IP GUI:
1. Security.
2. DoS Protection.
3. Device Protection.
4. Expand each of the applicable families (Network, DNS, SIP) depending on the traffic being handled by the BIG-IP and verify the "State" is set to "Mitigate" for all signatures in that family.
If the BIG-IP appliance is not configured to protect against known and unknown types of DoS attacks by employing rate-based attack prevention behavior analysis, this is a finding.
V-266156
False
F5BI-AP-300059
If the BIG-IP appliance does not perform content filtering as part of the traffic management functions, this is not applicable.
From the BIG-IP GUI:
1. Security.
2. DoS Protection.
3. Device Protection.
4. Expand each of the applicable families (Network, DNS, SIP) depending on the traffic being handled by the BIG-IP and verify the "State" is set to "Mitigate" for all signatures in that family.
If the BIG-IP appliance is not configured to protect against known and unknown types of DoS attacks by employing rate-based attack prevention behavior analysis, this is a finding.
M
5640