STIGQter STIGQter: STIG Summary: Google Android 14 MDFPP 3.3 BYOAD Security Technical Implementation Guide Version: 1 Release: 2 Benchmark Date: 01 Oct 2025:

Google Android 14 must be configured to lock the display after 15 minutes (or less) of inactivity.

DISA Rule

SV-260128r971318_rule

Vulnerability Number

V-260128

Group Title

PP-MDF-333030

Rule Version

GOOG-14-706300

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure the Google Android 14 device to enable a screen-lock policy of 15 minutes for the max period of inactivity.

Note: Google Android 14 does not support the 15 minute increment. The available allowable selection is 10 minutes, then increases to 30 minutes. Therefore, the control will be set to 10 minutes.

On the EMM Console:

1. Open "Lock screen restrictions".
2. Set "Max time to screen lock" to "600".
Note: The units are in seconds.

Check Contents

Review managed Google Android device configuration settings to determine if the mobile device is enforcing a screen-lock policy that will lock the display after a period of 15 minutes or less of inactivity.

Note: Google Android 14 does not support the 15-minute increment. The available allowable selection is 10 minutes, then increases to 30 minutes. Therefore, the control should be set to 10 minutes.

This validation procedure is performed on both the EMM Administration Console and the Android 14 device.

On the EMM Console:

1. Open "Lock screen restrictions".
2. Verify that "Max time to screen lock" is set to "600".
Note: The units are in seconds.

On the managed Google Android 14 device:

1. Open Settings >> Display.
2. Tap "Screen timeout".
3. Ensure the Screen timeout value is set to "600" seconds or less.

If the EMM console device policy is not set to enable a screen-lock policy that will lock the display after a period of inactivity of 600 seconds or less, this is a finding.

Vulnerability Number

V-260128

Documentable

False

Rule Version

GOOG-14-706300

Severity Override Guidance

Review managed Google Android device configuration settings to determine if the mobile device is enforcing a screen-lock policy that will lock the display after a period of 15 minutes or less of inactivity.

Note: Google Android 14 does not support the 15-minute increment. The available allowable selection is 10 minutes, then increases to 30 minutes. Therefore, the control should be set to 10 minutes.

This validation procedure is performed on both the EMM Administration Console and the Android 14 device.

On the EMM Console:

1. Open "Lock screen restrictions".
2. Verify that "Max time to screen lock" is set to "600".
Note: The units are in seconds.

On the managed Google Android 14 device:

1. Open Settings >> Display.
2. Tap "Screen timeout".
3. Ensure the Screen timeout value is set to "600" seconds or less.

If the EMM console device policy is not set to enable a screen-lock policy that will lock the display after a period of inactivity of 600 seconds or less, this is a finding.

Check Content Reference

M

Target Key

5589