STIGQter STIGQter: STIG Summary: Enterprise Voice, Video, and Messaging Endpoint Security Requirements Guide Version: 1 Release: 3 Benchmark Date: 01 Oct 2025:

The Enterprise Voice, Video, and Messaging Endpoint must be configured to disable the Far End Camera Control feature if supported.

DISA Rule

SV-259948r1132554_rule

Vulnerability Number

V-259948

Group Title

SRG-NET-000018

Rule Version

SRG-NET-000018-VVEP-00108

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Perform the following tasks:
Configure the CODEC to disable far end camera control.
OR
Document and validate the mission requirements that require far end camera control to be enabled and obtain AO approval. Maintain the requirement and approval documentation for review by auditors.

Check Contents

Ensure far end camera control is disabled unless required to satisfy validated, approved, and documented mission requirements.

Note: The documented and validated mission requirements along with their approval(s) are maintained by the ISSO for inspection by auditors. Such approval is obtained from the AO or ISSM responsible for the VTU(s) or system.

Determine if remote monitoring is required and approved to meet mission requirements. Have the ISSO or SA demonstrate compliance with the requirement.

Vulnerability Number

V-259948

Documentable

False

Rule Version

SRG-NET-000018-VVEP-00108

Severity Override Guidance

Ensure far end camera control is disabled unless required to satisfy validated, approved, and documented mission requirements.

Note: The documented and validated mission requirements along with their approval(s) are maintained by the ISSO for inspection by auditors. Such approval is obtained from the AO or ISSM responsible for the VTU(s) or system.

Determine if remote monitoring is required and approved to meet mission requirements. Have the ISSO or SA demonstrate compliance with the requirement.

Check Content Reference

M

Target Key

5586