SV-258726r959010_rule
V-258726
SRG-OS-000480-VMM-002000
VMCH-80-000213
CAT II
10
For each virtual machine do the following:
From the vSphere Client, right-click the Virtual Machine and go to "Edit Settings".
Select the USB controller, click the circled "X" to remove it, and click "OK".
or
From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command:
Get-VM "VM Name" | Get-USBDevice | Remove-USBDevice
Note: This will not remove the USB controller, just any connected devices.
For each virtual machine do the following:
From the vSphere Client, right-click the Virtual Machine and go to "Edit Settings".
Review the VM's hardware and verify no USB devices exist.
or
From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following commands:
Get-VM | Where {$_.ExtensionData.Config.Hardware.Device.DeviceInfo.Label -match "usb"}
Get-VM | Get-UsbDevice
If a virtual machine has any USB devices or USB controllers present, this is a finding.
If USB smart card readers are used to pass smart cards through the VM console to a VM, the use of a USB controller and USB devices for that purpose is not a finding.
V-258726
False
VMCH-80-000213
For each virtual machine do the following:
From the vSphere Client, right-click the Virtual Machine and go to "Edit Settings".
Review the VM's hardware and verify no USB devices exist.
or
From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following commands:
Get-VM | Where {$_.ExtensionData.Config.Hardware.Device.DeviceInfo.Label -match "usb"}
Get-VM | Get-UsbDevice
If a virtual machine has any USB devices or USB controllers present, this is a finding.
If USB smart card readers are used to pass smart cards through the VM console to a VM, the use of a USB controller and USB devices for that purpose is not a finding.
M
5563