STIGQter STIGQter: STIG Summary: VMware vSphere 8.0 Virtual Machine Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 01 Aug 2024:

Virtual machines (VMs) must disable access through the "dvfilter" network Application Programming Interface (API).

DISA Rule

SV-258713r959010_rule

Vulnerability Number

V-258713

Group Title

SRG-OS-000480-VMM-002000

Rule Version

VMCH-80-000200

Severity

CAT III

CCI(s)

Weight

10

Fix Recommendation

For each virtual machine do the following:

From the vSphere Client, right-click the Virtual Machine and go to Edit Settings >> Advanced Parameters.

Look for settings with the format "ethernet*.filter*.name".

Ensure only required VMs use this setting.

or

From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command:

Get-VM "VM Name" | Get-AdvancedSetting -Name ethernetX.filterY.name | Remove-AdvancedSetting

Note: Change the X and Y values to match the specific setting in the organization's environment.

Note: The VM must be powered off to configure the advanced settings through the vSphere Client. Therefore, it is recommended to configure these settings with PowerCLI as this can be done while the VM is powered on. Settings do not take effect via either method until the virtual machine is cold started, not rebooted.

Check Contents

For each virtual machine do the following:

From the vSphere Client, right-click the Virtual Machine and go to Edit Settings >> Advanced Parameters.

Verify the settings with the format "ethernet*.filter*.name" do not exist.

or

From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command:

Get-VM "VM Name" | Get-AdvancedSetting -Name "ethernet*.filter*.name*"

If the virtual machine advanced setting "ethernet*.filter*.name" exists and dvfilters are not in use, this is a finding.

If the virtual machine advanced setting "ethernet*.filter*.name" exists and the value is not valid, this is a finding.

Vulnerability Number

V-258713

Documentable

False

Rule Version

VMCH-80-000200

Severity Override Guidance

For each virtual machine do the following:

From the vSphere Client, right-click the Virtual Machine and go to Edit Settings >> Advanced Parameters.

Verify the settings with the format "ethernet*.filter*.name" do not exist.

or

From a PowerCLI command prompt while connected to the ESXi host or vCenter server, run the following command:

Get-VM "VM Name" | Get-AdvancedSetting -Name "ethernet*.filter*.name*"

If the virtual machine advanced setting "ethernet*.filter*.name" exists and dvfilters are not in use, this is a finding.

If the virtual machine advanced setting "ethernet*.filter*.name" exists and the value is not valid, this is a finding.

Check Content Reference

M

Target Key

5563