STIGQter: STIG Summary: Ivanti Sentry 9.x ALG Security Technical Implementation Guide Version: 3 Release: 1 Benchmark Date: 24 Oct 2024:

The Sentry providing intermediary services for remote access communications traffic must use encryption services that implement NIST FIPS-validated cryptography to protect the confidentiality of remote access sessions.

DISA Rule

SV-251011r1028175_rule

Vulnerability Number

V-251011

Group Title

SRG-NET-000062-ALG-000011

Rule Version

MOIS-AL-000160

Severity

CAT II

CCI(s)

• CCI-000068 - Implement cryptographic mechanisms to protect the confidentiality of remote access sessions.

Weight

10

Fix Recommendation

Configure the Sentry Server to use a FIPS 140-2-validated cryptographic module.

On the Sentry console, do the following:
1. SSH to Sentry Server from any SSH client.
2. Enter the administrator credentials established when Sentry was installed.
3. Enter "enable".
4. When prompted, enter the "enable secret" set when Sentry was installed.
5. Enter "configure terminal".
6. Enter the following command to enable FIPS: FIPS
7. Enter the following command to proceed with the necessary reload: do reload
8. Enter "Yes" at save configuration modified prompt.
9. Enter "Yes" at proceed do reload.

Check Contents

Verify the Sentry uses encryption services that implement NIST FIPS-validated cryptography to protect the confidentiality of remote access sessions.

On the Sentry CLI console, do the following:
1. SSH to Sentry Server from any SSH client.
2. Enter the administrator credentials established when Sentry was installed.
3. Enter "enable".
4. When prompted, enter the "enable secret" set when Sentry was installed.
5. Enter "show FIPS".
6. Verify "FIPS 140 mode is enabled" is displayed.

If the Sentry Server does not report that FIPS mode is "enabled", this is a finding.

Vulnerability Number

V-251011

Documentable

False

Rule Version

MOIS-AL-000160

Severity Override Guidance

Verify the Sentry uses encryption services that implement NIST FIPS-validated cryptography to protect the confidentiality of remote access sessions.

On the Sentry CLI console, do the following:
1. SSH to Sentry Server from any SSH client.
2. Enter the administrator credentials established when Sentry was installed.
3. Enter "enable".
4. When prompted, enter the "enable secret" set when Sentry was installed.
5. Enter "show FIPS".
6. Verify "FIPS 140 mode is enabled" is displayed.

If the Sentry Server does not report that FIPS mode is "enabled", this is a finding.

Check Content Reference

M

Target Key

5439