STIGQter: STIG Summary: Cisco ISE NAC Security Technical Implementation Guide Version: 2 Release: 4 Benchmark Date: 01 Jul 2026:

The Cisco ISE must be configured to notify the user before proceeding with remediation of the user's endpoint device when automated remediation is used. This is required for compliance with C2C Step 3.

DISA Rule

SV-242582r1146391_rule

Vulnerability Number

V-242582

Group Title

SRG-NET-000015-NAC-000070

Rule Version

CSCO-NC-000080

Severity

CAT III

CCI(s)

• CCI-000213 - Enforce approved authorizations for logical access to information and system resources in accordance with applicable access control policies.

Weight

10

Fix Recommendation

If required by the NAC SSP, configure a message prior to remediation:

1. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements.
2. On the requirements under "Remediation Actions", define a message in the "Message Shown to Agent User".
3. Choose "Done".
4. Choose "Save".

Check Contents

If DoD is not at C2C Step 3 or higher, this is not a finding.
If not required by the NAC SSP, this is not a finding.

Verify that each requirement used has a message to display.

1. Navigate to Work Centers >> Posture >> Posture Policy.
2. Make a note of each "Requirement" tied to an enabled Posture Policy.
3. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements.
4. Verify that each requirement noted has a message in the "Message Shown to Agent User" box.

If a requirement that is used does not have a message, this is a finding.

Vulnerability Number

V-242582

Documentable

False

Rule Version

CSCO-NC-000080

Severity Override Guidance

If DoD is not at C2C Step 3 or higher, this is not a finding.
If not required by the NAC SSP, this is not a finding.

Verify that each requirement used has a message to display.

1. Navigate to Work Centers >> Posture >> Posture Policy.
2. Make a note of each "Requirement" tied to an enabled Posture Policy.
3. Navigate to Work Centers >> Posture >> Policy Elements >> Requirements.
4. Verify that each requirement noted has a message in the "Message Shown to Agent User" box.

If a requirement that is used does not have a message, this is a finding.

Check Content Reference

M

Target Key

5383