STIGQter: STIG Summary: Trend Micro TippingPoint IDPS Security Technical Implementation Guide Version: 2 Release: 2 Benchmark Date: 24 Oct 2024:

The TPS must block malicious ICMP packets by properly configuring ICMP signatures and rules.

DISA Rule

SV-242195r840193_rule

Vulnerability Number

V-242195

Group Title

SRG-NET-000273-IDPS-00204

Rule Version

TIPP-IP-000300

Severity

CAT II

CCI(s)

CCI-001312 - Generates error messages that provide information necessary for corrective actions without revealing information that could be exploited.

Weight

Fix Recommendation

1. In the Trend Micro SMS, navigate to "Profiles" and "Inspection Profiles" and select the organization's profile.
2. If there is not one configured, select "Default".
3. Click "Search".
4. Select the Filter Category "Traffic Normalization, Exploits, and Vulnerabilities". Select the "Filter Name" section and type "ICMP".
5. Set all the items in the search to Block+Notify.

Note: If the site has set up a security profile (i.e., not using the default profile), then this should be inspected using the site's SSP for compliance.

Check Contents

1. In the Trend Micro SMS, navigate to "Profiles" and "Inspection Profiles" and select the organization's profile.
2. If there is not one configured, select "Default".
3. Click "Search".
4. Under "Filter criteria", select the Filter Category "Traffic Normalization, Exploits, and Vulnerabilities". Select the "Filter Name" section and type "ICMP".

If the following filter names produced in the search list are not set to Block+Notify, this is a finding.

Note: If the site has set up a security profile (i.e., not using the default profile), then this should be inspected using the site's SSP for compliance.

Vulnerability Number

V-242195

Documentable

False

Rule Version

TIPP-IP-000300

Severity Override Guidance

1. In the Trend Micro SMS, navigate to "Profiles" and "Inspection Profiles" and select the organization's profile.
2. If there is not one configured, select "Default".
3. Click "Search".
4. Under "Filter criteria", select the Filter Category "Traffic Normalization, Exploits, and Vulnerabilities". Select the "Filter Name" section and type "ICMP".

If the following filter names produced in the search list are not set to Block+Notify, this is a finding.

Note: If the site has set up a security profile (i.e., not using the default profile), then this should be inspected using the site's SSP for compliance.

Check Content Reference

Target Key

5367