STIGQter: STIG Summary: Honeywell Android 9.x COPE Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 14 Jan 2021:

The Honeywell Mobility Edge Android Pie device must be configured to lock the display after 15 minutes (or less) of inactivity.

DISA Rule

SV-235065r626527_rule

Vulnerability Number

V-235065

Group Title

PP-MDF-301040

Rule Version

HONW-09-000400

Severity

CAT II

CCI(s)

• CCI-000057 - The information system initiates a session lock after the organization-defined time period of inactivity.

Weight

10

Fix Recommendation

Configure the Honeywell Android device to lock the device display after 15 minutes (or less) of inactivity.

On the MDM console:
1. Open password requirements.
2. Open device password section.
3. Set "Device Lock Timeout" to any number between 1 and 15.

Check Contents

Review Honeywell Android device configuration settings to determine if the mobile device has the screen lock timeout set to 15 minutes or less.

This validation procedure is performed on both the MDM Administration console and the Android Pie device.

On the MDM console:
1. Open passcode requirements.
2. Open device passcode section.
3. Ensure "Device Lock Timeout" to any number between 1 and 15.

On the Honeywell Android Pie device:
1. Open settings >> Security & location.
2. Click the "gear" icon next to "Screen lock".
3. Ensure "Automatically lock" is set to between 0 and 15 minutes.

If the MDM console device policy is not set to 15 minutes or less for the screen lock timeout or on the Honeywell Android Pie device, the device policy is not set to 15 minutes or less for the screen lock timeout, this is a finding.

Vulnerability Number

V-235065

Documentable

False

Rule Version

HONW-09-000400

Severity Override Guidance

Review Honeywell Android device configuration settings to determine if the mobile device has the screen lock timeout set to 15 minutes or less.

This validation procedure is performed on both the MDM Administration console and the Android Pie device.

On the MDM console:
1. Open passcode requirements.
2. Open device passcode section.
3. Ensure "Device Lock Timeout" to any number between 1 and 15.

On the Honeywell Android Pie device:
1. Open settings >> Security & location.
2. Click the "gear" icon next to "Screen lock".
3. Ensure "Automatically lock" is set to between 0 and 15 minutes.

If the MDM console device policy is not set to 15 minutes or less for the screen lock timeout or on the Honeywell Android Pie device, the device policy is not set to 15 minutes or less for the screen lock timeout, this is a finding.

Check Content Reference

M

Target Key

5276

Comments