STIGQter STIGQter: STIG Summary: Honeywell Android 9.x COBO Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 14 Jan 2021:

The Honeywell Mobility Edge Android Pie device must be configured to disable USB mass storage mode.

DISA Rule

SV-235047r626530_rule

Vulnerability Number

V-235047

Group Title

PP-MDF-301210

Rule Version

HONW-09-003500

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure the Honeywell Android device to disable USB mass storage mode.

On the MDM console:
1. Open Device Restrictions.
2. Open Restrictions settings.
3. Select "Disallow usb file transfer".

Check Contents

Review Honeywell Android device configuration settings to determine if the mobile device has a USB mass storage mode and whether it has been disabled.

This validation procedure is performed on both the MDM Administration console and the Android Pie device.

On the MDM console:
1. Open Device Restrictions.
2. Open Restrictions settings.
3. Ensure "Disallow usb file transfer" is selected.

On the Honeywell Android Pie device:
1. Plug USB cable into Android Pie device and connect to a non-DoD network-managed PC.
2. Go to Settings >> Connected devices >> USB.
3. Ensure No data transfer is selected.

If the MDM console device policy is not set to disable USB mass storage mode or on the Honeywell Android Pie device, the device policy is not set to disable USB mass storage mode, this is a finding.

Vulnerability Number

V-235047

Documentable

False

Rule Version

HONW-09-003500

Severity Override Guidance

Review Honeywell Android device configuration settings to determine if the mobile device has a USB mass storage mode and whether it has been disabled.

This validation procedure is performed on both the MDM Administration console and the Android Pie device.

On the MDM console:
1. Open Device Restrictions.
2. Open Restrictions settings.
3. Ensure "Disallow usb file transfer" is selected.

On the Honeywell Android Pie device:
1. Plug USB cable into Android Pie device and connect to a non-DoD network-managed PC.
2. Go to Settings >> Connected devices >> USB.
3. Ensure No data transfer is selected.

If the MDM console device policy is not set to disable USB mass storage mode or on the Honeywell Android Pie device, the device policy is not set to disable USB mass storage mode, this is a finding.

Check Content Reference

M

Target Key

5275

Comments