STIGQter STIGQter: STIG Summary: Samsung Android 11 with Knox 3.x Legacy Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 20 Nov 2020:

Samsung Android must be configured to disallow configuration of Date Time.

DISA Rule

SV-231044r608683_rule

Vulnerability Number

V-231044

Group Title

PP-MDF-991000

Rule Version

KNOX-11-020600

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure Samsung Android to disallow configuration of the date and time.

On the management tool, in the device Date Time section, set "Date Time Change" to "Disable".

Check Contents

Review Samsung Android configuration settings to determine if the configuration of the date and time is disallowed.

This validation procedure is performed on both the management tool Administration Console and the Samsung Android device.

On the management tool, in the device Date Time section, verify that "Date Time Change" is set to "Disable".

On the Samsung Android device:
1. Open Settings >> General management >> Date and time.
2. Verify that "Automatic data and time" is on and the user cannot disable it.

If on the management tool "Date Time Change" is not set to "Disable", or on the Samsung Android device "Automatic date and time" is not set or the user can disable it, this is a finding.

Vulnerability Number

V-231044

Documentable

False

Rule Version

KNOX-11-020600

Severity Override Guidance

Review Samsung Android configuration settings to determine if the configuration of the date and time is disallowed.

This validation procedure is performed on both the management tool Administration Console and the Samsung Android device.

On the management tool, in the device Date Time section, verify that "Date Time Change" is set to "Disable".

On the Samsung Android device:
1. Open Settings >> General management >> Date and time.
2. Verify that "Automatic data and time" is on and the user cannot disable it.

If on the management tool "Date Time Change" is not set to "Disable", or on the Samsung Android device "Automatic date and time" is not set or the user can disable it, this is a finding.

Check Content Reference

M

Target Key

5248

Comments