STIGQter STIGQter: STIG Summary: Red Hat Enterprise Linux 8 Security Technical Implementation Guide Version: 1 Release: 2 Benchmark Date: 23 Apr 2021:

RHEL 8 must disable the asynchronous transfer mode (ATM) protocol.

DISA Rule

SV-230494r627750_rule

Vulnerability Number

V-230494

Group Title

SRG-OS-000095-GPOS-00049

Rule Version

RHEL-08-040021

Severity

CAT III

CCI(s)

Weight

10

Fix Recommendation

Configure the operating system to disable the ability to use the ATM protocol kernel module.

Add or update the following lines in the file "/etc/modprobe.d/blacklist.conf":

install ATM /bin/true
blacklist ATM

Reboot the system for the settings to take effect.

Check Contents

Verify the operating system disables the ability to load the ATM protocol kernel module.

$ sudo grep -ri ATM /etc/modprobe.d/* | grep -i "/bin/true"

install ATM /bin/true

If the command does not return any output, or the line is commented out, and use of the ATM protocol is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.

Verify the operating system disables the ability to use the ATM protocol.

Check to see if the ATM protocol is disabled with the following command:

$ sudo grep -ri ATM /etc/modprobe.d/* | grep -i "blacklist"

blacklist ATM

If the command does not return any output or the output is not "blacklist atm", and use of the ATM protocol is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.

Vulnerability Number

V-230494

Documentable

False

Rule Version

RHEL-08-040021

Severity Override Guidance

Verify the operating system disables the ability to load the ATM protocol kernel module.

$ sudo grep -ri ATM /etc/modprobe.d/* | grep -i "/bin/true"

install ATM /bin/true

If the command does not return any output, or the line is commented out, and use of the ATM protocol is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.

Verify the operating system disables the ability to use the ATM protocol.

Check to see if the ATM protocol is disabled with the following command:

$ sudo grep -ri ATM /etc/modprobe.d/* | grep -i "blacklist"

blacklist ATM

If the command does not return any output or the output is not "blacklist atm", and use of the ATM protocol is not documented with the Information System Security Officer (ISSO) as an operational requirement, this is a finding.

Check Content Reference

M

Target Key

2921

Comments