STIGQter: STIG Summary: Cisco IOS XR Router RTR Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 23 Oct 2020:

The Cisco perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header.

DISA Rule

SV-230157r538611_rule

Vulnerability Number

V-230157

Group Title

SRG-NET-000364-RTR-000205

Rule Version

CISC-RT-000397

Severity

CAT II

CCI(s)

• CCI-002403 - The information system only allows incoming communications from organization-defined authorized sources routed to organization-defined authorized destinations.

Weight

10

Fix Recommendation

Configure the router to drop IPv6 packets containing a Destination Option header with option type value of 0xC3 (NSAP address) as shown in the example below.

RP/0/0/CPU0:R3(config)# ipv6 access-list FILTER_IPV6
RP/0/0/CPU0:R3(config-ipv6-acl)# deny 60 any any dest-option-type 195 log
RP/0/0/CPU0:R3(config-ipv6-acl)# permit ipv6 …
…
…
…
RP/0/0/CPU0:R3(config-ipv6-acl)# deny ipv6 any any log
RP/0/0/CPU0:R3(config-ipv6-acl)# exit
RP/0/0/CPU0:R3(config)# interface gigabitethernet 0/2/0/2
RP/0/0/CPU0:R3(config-if)# ipv6 access-group FILTER_IPV6 ingress
RP/0/0/CPU0:R3(config-if)# end

Check Contents

This requirement is not applicable for the DODIN Backbone.

Review the router configuration and determine if filters are bound to the applicable interfaces to drop IPv6 packets containing the NSAP address option within Destination Option header.

Step 1: Verify that an inbound IPv6 ACL has been configured on the external interface.

interface interface gigabitethernet 0/2/0/2
ipv6 address 2001::1:0:22/64
ipv6 access-group FILTER_IPV6 ingress

Step 2: Verify that the ACL drops IPv6 packets containing the NSAP address option within Destination Option header as shown in the example below.

ipv6 access-list FILTER_IPV6
10 deny 60 any any dest-option-type 195 log
20 permit ipv6 …
…
…
…
90 deny ipv6 any any log

If the router is not configured to drop IPv6 packets containing the NSAP address option within Destination Option header, this is a finding.

Vulnerability Number

V-230157

Documentable

False

Rule Version

CISC-RT-000397

Severity Override Guidance

This requirement is not applicable for the DODIN Backbone.

Review the router configuration and determine if filters are bound to the applicable interfaces to drop IPv6 packets containing the NSAP address option within Destination Option header.

Step 1: Verify that an inbound IPv6 ACL has been configured on the external interface.

interface interface gigabitethernet 0/2/0/2
ipv6 address 2001::1:0:22/64
ipv6 access-group FILTER_IPV6 ingress

Step 2: Verify that the ACL drops IPv6 packets containing the NSAP address option within Destination Option header as shown in the example below.

ipv6 access-list FILTER_IPV6
10 deny 60 any any dest-option-type 195 log
20 permit ipv6 …
…
…
…
90 deny ipv6 any any log

If the router is not configured to drop IPv6 packets containing the NSAP address option within Destination Option header, this is a finding.

Check Content Reference

M

Target Key

4029

Comments