STIGQter: STIG Summary: Motorola Android 9.x COBO Security Technical Implementation Guide Version: 1 Release: 1 Benchmark Date: 14 Oct 2020:

The Motorola Android Pie must be configured to enable a screen lock policy that will lock the display after a period of inactivity.

DISA Rule

SV-230112r569707_rule

Vulnerability Number

V-230112

Group Title

GOOG-09-000300

Rule Version

MOTO-09-000300

Severity

CAT II

CCI(s)

• CCI-000057 - The information system initiates a session lock after the organization-defined time period of inactivity.

Weight

10

Fix Recommendation

Configure the Motorola Android device to enable a screen lock policy that will lock the display after a period of inactivity.

On the MDM console:
1. Open password requirements.
2. Open device password section.
3. Set "Device Lock Timeout" to any number desired. Units are in minutes.

Check Contents

Review Motorola Android device configuration settings to determine if the mobile device is enforcing a screen lock policy that will lock the display after a period of inactivity.

This validation procedure is performed on both the MDM Administration Console and the Android Pie device.

On the MDM console:
1. Open password requirements.
2. Open device password section.
3. Verify "Device Lock Timeout" is set to any number desired. Units are in minutes.

On the Android Pie device:
1. Open Settings >> Security & location.
2. Click the gear icon next to "Screen lock".
3. Verify "Automatically lock" is set to a required time.

If the MDM console device policy is not set to enable a screen lock policy that will lock the display after a period of inactivity, or on the Android Pie device, the device policy is not set to enable a screen lock policy that will lock the display after a period of inactivity, this is a finding.

Vulnerability Number

V-230112

Documentable

False

Rule Version

MOTO-09-000300

Severity Override Guidance

Review Motorola Android device configuration settings to determine if the mobile device is enforcing a screen lock policy that will lock the display after a period of inactivity.

This validation procedure is performed on both the MDM Administration Console and the Android Pie device.

On the MDM console:
1. Open password requirements.
2. Open device password section.
3. Verify "Device Lock Timeout" is set to any number desired. Units are in minutes.

On the Android Pie device:
1. Open Settings >> Security & location.
2. Click the gear icon next to "Screen lock".
3. Verify "Automatically lock" is set to a required time.

If the MDM console device policy is not set to enable a screen lock policy that will lock the display after a period of inactivity, or on the Android Pie device, the device policy is not set to enable a screen lock policy that will lock the display after a period of inactivity, this is a finding.

Check Content Reference

M

Target Key

5234

Comments