STIGQter: STIG Summary: Oracle Linux 7 Security Technical Implementation Guide Version: 2 Release: 3 Benchmark Date: 23 Apr 2021:

The Oracle Linux operating system must be configured to lock accounts for a minimum of 15 minutes after three unsuccessful logon attempts within a 15-minute timeframe.

DISA Rule

SV-221690r603787_rule

Vulnerability Number

V-221690

Group Title

SRG-OS-000021-GPOS-00005

Rule Version

OL07-00-010320

Severity

CAT II

CCI(s)

• CCI-002236 - The organization defines the time period the information system will automatically lock the account or node when the maximum number of unsuccessful logon attempts is exceeded.
• CCI-002237 - The organization defines the delay algorithm to be employed by the information system to delay the next logon prompt when the maximum number of unsuccessful logon attempts is exceeded.
• CCI-002238 - The information system automatically locks the account or node for either an organization-defined time period, until the locked account or node is released by an administrator, or delays the next logon prompt according to the organization-defined delay algorithm when the maximum number of unsuccessful logon attempts is exceeded.
• CCI-000044 - The information system enforces the organization-defined limit of consecutive invalid logon attempts by a user during the organization-defined time period.

Weight

10

Fix Recommendation

Configure the operating system to lock an account for the maximum period when three unsuccessful logon attempts in 15 minutes are made.

Add/Modify the appropriate sections of the "/etc/pam.d/system-auth" and "/etc/pam.d/password-auth" files to match the following lines:

auth required pam_faillock.so preauth silent audit deny=3 even_deny_root fail_interval=900 unlock_time=900
auth sufficient pam_unix.so try_first_pass
auth [default=die] pam_faillock.so authfail audit deny=3 even_deny_root fail_interval=900 unlock_time=900
account required pam_faillock.so

Note: Manual changes to the listed files may be overwritten by the "authconfig" program. The "authconfig" program should not be used to update the configurations listed in this requirement.

Check Contents

Check that the system locks an account for a minimum of 15 minutes after three unsuccessful logon attempts within a period of 15 minutes, with the following command:

# grep pam_faillock.so /etc/pam.d/password-auth
auth required pam_faillock.so preauth silent audit deny=3 even_deny_root fail_interval=900 unlock_time=900
auth [default=die] pam_faillock.so authfail audit deny=3 even_deny_root fail_interval=900 unlock_time=900
account required pam_faillock.so

If the "deny" parameter is set to "0" or a value greater than "3" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "even_deny_root" parameter is not set on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "fail_interval" parameter is set to "0" or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "unlock_time" parameter is not set to "0", "never", or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

Note: The maximum configurable value for "unlock_time" is "604800".

If any line referencing the "pam_faillock.so" module is commented out, this is a finding.
# grep pam_faillock.so /etc/pam.d/system-auth
auth required pam_faillock.so preauth silent audit deny=3 even_deny_root fail_interval=900 unlock_time=900
auth [default=die] pam_faillock.so authfail audit deny=3 even_deny_root fail_interval=900 unlock_time=900
account required pam_faillock.so

If the "deny" parameter is set to "0" or a value greater than "3" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "even_deny_root" parameter is not set on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "fail_interval" parameter is set to "0" or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "unlock_time" parameter is not set to "0", "never", or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module or is missing from these lines, this is a finding.
Note: The maximum configurable value for "unlock_time" is "604800".

If any line referencing the "pam_faillock.so" module is commented out, this is a finding.

Vulnerability Number

V-221690

Documentable

False

Rule Version

OL07-00-010320

Severity Override Guidance

Check that the system locks an account for a minimum of 15 minutes after three unsuccessful logon attempts within a period of 15 minutes, with the following command:

# grep pam_faillock.so /etc/pam.d/password-auth
auth required pam_faillock.so preauth silent audit deny=3 even_deny_root fail_interval=900 unlock_time=900
auth [default=die] pam_faillock.so authfail audit deny=3 even_deny_root fail_interval=900 unlock_time=900
account required pam_faillock.so

If the "deny" parameter is set to "0" or a value greater than "3" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "even_deny_root" parameter is not set on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "fail_interval" parameter is set to "0" or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "unlock_time" parameter is not set to "0", "never", or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

Note: The maximum configurable value for "unlock_time" is "604800".

If any line referencing the "pam_faillock.so" module is commented out, this is a finding.
# grep pam_faillock.so /etc/pam.d/system-auth
auth required pam_faillock.so preauth silent audit deny=3 even_deny_root fail_interval=900 unlock_time=900
auth [default=die] pam_faillock.so authfail audit deny=3 even_deny_root fail_interval=900 unlock_time=900
account required pam_faillock.so

If the "deny" parameter is set to "0" or a value greater than "3" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "even_deny_root" parameter is not set on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "fail_interval" parameter is set to "0" or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module, or is missing from these lines, this is a finding.

If the "unlock_time" parameter is not set to "0", "never", or is set to a value less than "900" on both "auth" lines with the "pam_faillock.so" module or is missing from these lines, this is a finding.
Note: The maximum configurable value for "unlock_time" is "604800".

If any line referencing the "pam_faillock.so" module is commented out, this is a finding.

Check Content Reference

M

Target Key

4089

Comments