STIGQter STIGQter: STIG Summary: Cisco IOS Switch RTR Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 23 Apr 2021:

The Cisco switch must be configured to produce audit records containing information to establish the source of the events.

DISA Rule

SV-220438r622190_rule

Vulnerability Number

V-220438

Group Title

SRG-NET-000077-RTR-000001

Rule Version

CISC-RT-000220

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure the switch to log events containing information to establish where the events occurred as shown in the example below:

SW1(config)#ip access-list extended INGRESS_FILTER



SW1(config-ext-nacl)#deny ip any any log-input

Check Contents

Review the switch configuration to verify that events are logged containing information to establish the source of the events as shown in the example below:

ip access-list extended INGRESS_FILTER
permit tcp any any established
permit tcp any host x.11.1.5 eq www
permit icmp host x.11.1.1 host x.11.1.2 echo
permit icmp any any echo-reply



deny ip any any log-input

Note: When the log-input parameter is configured on deny statements, the log record will contain the Layer 2 address of the forwarding device for any packet being dropped.

If the switch is not configured to produce audit records containing information to establish the source of the events, this is a finding.

Vulnerability Number

V-220438

Documentable

False

Rule Version

CISC-RT-000220

Severity Override Guidance

Review the switch configuration to verify that events are logged containing information to establish the source of the events as shown in the example below:

ip access-list extended INGRESS_FILTER
permit tcp any any established
permit tcp any host x.11.1.5 eq www
permit icmp host x.11.1.1 host x.11.1.2 echo
permit icmp any any echo-reply



deny ip any any log-input

Note: When the log-input parameter is configured on deny statements, the log record will contain the Layer 2 address of the forwarding device for any packet being dropped.

If the switch is not configured to produce audit records containing information to establish the source of the events, this is a finding.

Check Content Reference

M

Target Key

4065

Comments