STIGQter: STIG Summary: Juniper SRX Services Gateway VPN Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 23 Apr 2021: STIGQter: STIG Summary: Juniper SRX Services Gateway VPN Security Technical Implementation Guide Version: 2 Release: 1 Benchmark Date: 23 Apr 2021:SV-214685r385489_rule
V-214685
SRG-NET-000138
JUSX-VN-000018
CAT II
10
Configure the LDAP access profile. The LDAP server must use DoD PKI for authentication of users.
[edit]
set access profile <VPN-LDAP-PROFILE-NAME> authentication-order ldap
set access profile <VPN-LDAP-PROFILE-NAME> address-assignment pool dyn-vpn-pool
set access profile <VPN-LDAP-PROFILE-NAME> ldap-options base-distinguished-name CN=Users, DC=firewall, DC=com (Location from where LDAP will start searching for users)
set access profile <VPN-LDAP-PROFILE-NAME> ldap-options search search-filter sAMAccountName=
set access profile <VPN-LDAP-PROFILE-NAME> ldap-options search admin-search distinguished-name CN=Administrator, CN=Users, DC=firewall, DC=com (User who is authorized to search the ldap tree)
set access profile <VPN-LDAP-PROFILE-NAME> ldap-options search admin-search password <Administrator Password>
set access profile <VPN-LDAP-PROFILE-NAME> ldap-server <AD Server IP address> port 389/636
set access firewall-authentication pass-through default-profile <VPN-LDAP-PROFILE-NAME>
set access firewall-authentication web-authentication default-profile <VPN-LDAP-PROFILE-NAME>
Note: To find the user or administrator base DN, use any LDAP browser. On an Internet search engine, search for ldp.exe, which is a very basic LDAP browser.
When using LDAP groups to authenticate a user, or a user belonging to a group in the active directory, include the following statement:
set access profile <VPN-LDAP-PROFILE-NAME> session-options client-group <group-name>
Note: Without the above statement, users are not searched based on the group name or group string.
The IP address pool configuration is as follows (the user will be assigned the IP from this pool):
set access address-assignment pool dyn-vpn-pool family inet network <IP Network for Dynamic-VPN User> (e.g.. 192.168.100.0/24)
set access address-assignment pool dyn-vpn-pool family inet range dyn-vpn-pool-range low <Starting IP address for Dynamic-VPN User> (e.g.. 192.168.100.1)
set access address-assignment pool dyn-vpn-pool family inet range dyn-vpn-pool-range high <ending IP address for Dynamic-VPN User> (e.g.. 192.168.100.100)
Note: The IP network used for dynamic VPN users should be different from the IP network of the external interface used in the IKE configuration.
The access profile is linked to the xauth of the gateway for dynamic VPN.
set security ike gateway <VPN-GATEWAY> xauth access-profile <VPN-LDAP-PROFILE-NAME>
Under security >> dynamic-vpn, add all the users that are going to use the dynamic VPN. The command is as follows:
set security dynamic-vpn clients all user
Note: For users who are going to use dynamic VPN, this will be the AD user logon name for each user.
Ask the site to identify the VPN access profile. Verify the access profile uses LDAP, not password configuration, for user remote access to the network. Ask the site representative if group accounts are allowed or configured.
[edit]
show security access profile <VPN-LDAP-PROFILE-NAME>
If an access profile that uses LDAP is not configured as the first option in the authentication order, this is a finding.
If group accounts are allowed for VPN logon, this is a finding.
V-214685
False
JUSX-VN-000018
Ask the site to identify the VPN access profile. Verify the access profile uses LDAP, not password configuration, for user remote access to the network. Ask the site representative if group accounts are allowed or configured.
[edit]
show security access profile <VPN-LDAP-PROFILE-NAME>
If an access profile that uses LDAP is not configured as the first option in the authentication order, this is a finding.
If group accounts are allowed for VPN logon, this is a finding.
M
4009