STIGQter STIGQter: STIG Summary: MobileIron Core v9.x MDM Security Technical Implementation Guide Version: 1 Release: 4 Benchmark Date: 26 Jul 2019: The MobileIron Core MDM server must be configured to enable an audit record for the following auditable events: any event selected in the ST under FAU_ALT_EXT.2.1.

DISA Rule

SV-85151r1_rule

Vulnerability Number

V-70529

Group Title

PP-MDM-202101

Rule Version

MICR-9X-102150

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

These procedures are the same as MICR-9X-103107. They only have to be performed once.

Configure MobileIron Core Server Common Criteria mode

1. SSH to MobileIron Core from any SSH client.
2. Enter the administrator credentials you set when you installed MobileIron Core.
3. Enter "enable".
4. When prompted, enter the "enable" secret you set when you installed MobileIron Core.
5. Enter "configure terminal".
6. Enter "common_criteria_mode".
7. Enter the following command to proceed with the necessary reload:

do reload

The system will not be reachable until the reboot is complete.

Check Contents

These procedures are the same as MICR-9X-103107. They only have to be performed once.

Review MobileIron Core Server documentation and configuration settings to determine if the server is configured to enable an audit record for the following auditable events: any event selected in the ST under FAU_ALT_EXT.2.1.

Check MobileIron Core Server Common Criteria mode
1. SSH to MobileIron Core from any SSH client.
2. Enter the administrator credentials that were set up when the MobileIron Core was installed.
3. Enter "show common_criteria_mode_status".
4. The following message should appear: "Common Criteria Mode is enabled".

If on the MobileIron Core server the Common Criteria Mode is not enabled, this is a finding.

Vulnerability Number

V-70529

Documentable

False

Rule Version

MICR-9X-102150

Severity Override Guidance

These procedures are the same as MICR-9X-103107. They only have to be performed once.

Review MobileIron Core Server documentation and configuration settings to determine if the server is configured to enable an audit record for the following auditable events: any event selected in the ST under FAU_ALT_EXT.2.1.

Check MobileIron Core Server Common Criteria mode
1. SSH to MobileIron Core from any SSH client.
2. Enter the administrator credentials that were set up when the MobileIron Core was installed.
3. Enter "show common_criteria_mode_status".
4. The following message should appear: "Common Criteria Mode is enabled".

If on the MobileIron Core server the Common Criteria Mode is not enabled, this is a finding.

Check Content Reference

M

Target Key

3081

Comments