STIGQter STIGQter: STIG Summary: Cisco IOS Router NDM Security Technical Implementation Guide Version: 1 Release: 2 Benchmark Date: 24 Jan 2020: The Cisco router must generate an alert that will then be sent to the ISSO, ISSM, and other designated personnel (deemed appropriate by the local organization) when the unauthorized installation of software is detected.

DISA Rule

SV-105265r1_rule

Vulnerability Number

V-96127

Group Title

SRG-APP-000377-NDM-000301

Rule Version

CISC-ND-001060

Severity

CAT II

CCI(s)

Weight

10

Fix Recommendation

Configure the router to send log messages to the syslog server as shown in the example below.

R4(config)#logging host x.x.x.x
R4(config)#logging trap notifications

Check Contents

The Cisco router is not compliant with this requirement. However, the risk associated with this requirement can be fully mitigated if the router is configured to send logs to a syslog server that can send alerts to the appropriate personnel.

Verify that the router is configured to send logs to a syslog server. The configuration should look similar to the example below:

logging trap notifications
logging x.x.x.x

Note: Default for sending log messages to the syslog server is informational (level 6); hence, the command logging trap informational will not be seen in the configuration. Level of log messages sent to the syslog server can be verified using the show logging command.

If the router is not configured to send log messages to a syslog server, this is a finding.

Vulnerability Number

V-96127

Documentable

False

Rule Version

CISC-ND-001060

Severity Override Guidance

The Cisco router is not compliant with this requirement. However, the risk associated with this requirement can be fully mitigated if the router is configured to send logs to a syslog server that can send alerts to the appropriate personnel.

Verify that the router is configured to send logs to a syslog server. The configuration should look similar to the example below:

logging trap notifications
logging x.x.x.x

Note: Default for sending log messages to the syslog server is informational (level 6); hence, the command logging trap informational will not be seen in the configuration. Level of log messages sent to the syslog server can be verified using the show logging command.

If the router is not configured to send log messages to a syslog server, this is a finding.

Check Content Reference

M

Target Key

3471

Comments